Microwave Low Severity
PF Appliance Error Code

Electrolux Microwave PF Error: Power failure detected and power restored.

Electrolux microwave pf error — understanding this error code helps you decide on the right course of action for your Electrolux appliance. What Is Electrolux Microwave Error Code PF? The PF code on Electrolux microwaves is a power failure notification that appears after electricity has been interrupted and restored. On models like the EMBD3010AS and […]

By Patrick Cooper Lead Appliance Repair Specialist & Technical Writer

Yes

DIY Fixable

From $80

Typical Repair Cost

15-30 min

Pro Repair Time

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. The microwave is perfectly safe to use after clearing the PF code. It is simply notifying you that power was interrupted and cooking needs to be manually restarted.

Can I reset the code?

Yes. Press stop or cancel to clear PF immediately. The microwave will then return to normal standby operation.

When to stop immediately?

Stop if you notice: Stop if PF appears repeatedly without any known power outages in your area., Do not ignore frequent PF codes as they may indicate a failing outlet or loose wiring..

Symptoms You May Notice

PF shown after power returns

The microwave display shows PF once electrical power is restored.

Clock display reset

The clock shows flashing zeros or is blank, indicating it lost power.

Cooking cycle interrupted

Any active cooking program has stopped and must be restarted manually.

Microwave beeps on power restoration

An audible alert sounds to notify the user that power was interrupted.

Possible Causes

1

Utility power outage

The local power grid experienced a momentary or extended outage.

DIY Possible
2

Tripped circuit breaker

The kitchen circuit breaker tripped due to overload from multiple appliances running simultaneously.

DIY Possible
3

Loose outlet connection

The wall outlet has a loose internal connection that intermittently drops power to the microwave plug.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Clear the PF code

    Press the stop or cancel button on the control panel to dismiss the PF notification.

    You may need to press the button twice — once to clear PF and once to return to standby mode.

  2. 2

    Check the power connection

    Verify that the microwave plug is fully inserted into the wall outlet and the outlet is firmly mounted.

    Wiggle the plug gently — if the connection feels loose, the outlet receptacle may need replacement.

  3. 3

    Inspect the circuit breaker

    Check the kitchen circuit breaker to ensure it is in the full ON position and has not tripped.

    If the breaker trips frequently, the microwave may need to be on its own dedicated circuit.

When to Call a Professional

Contact a qualified technician if:

  • PF appears multiple times per week with no utility outages reported.
  • The wall outlet feels warm or shows scorch marks around the plug.
  • Other appliances on the same circuit also experience intermittent power issues.

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Microwave Repair Service Schedule Appointment

More Microwave Error Codes

View all codes →
SE F5 F4 F3 F2 F1