Wine Refrigeration Low Severity
PF Appliance Error Code

Electrolux Wine Refrigeration PF Error: Power failure detected and power has been restored.

Electrolux wine refrigeration pf error — understanding this error code helps you decide on the right course of action for your Electrolux appliance. What Is Electrolux Wine Cooler Error Code PF? The PF code on Electrolux wine coolers is a power failure notification that appears after the unit loses and regains electrical power. On models […]

By Patrick Cooper Lead Appliance Repair Specialist & Technical Writer

Yes

DIY Fixable

From $100

Typical Repair Cost

15-30 min

Pro Repair Time

Quick Assessment

Answer to continue safely

Is it safe to keep using?

Yes. The wine cooler is safe to use after clearing PF. It is simply alerting you that power was interrupted so you can verify that cooling has resumed.

Can I reset the code?

Yes. Press any button to clear the PF code. The unit will resume normal cooling operation automatically.

When to stop immediately?

Stop if you notice: Stop if the compressor does not restart within 10 minutes after clearing PF., Do not ignore frequent PF alarms as they indicate an unreliable power supply that can damage the compressor..

Symptoms You May Notice

PF displayed on the control panel

The wine cooler display shows PF after electricity is restored following an outage.

Audible alarm beeping

The unit may sound an alarm to draw attention to the power failure event.

Temperature higher than set point

The displayed temperature is above the target because cooling was interrupted during the outage.

Clock or settings reset

Some settings may have reverted to defaults after the power loss.

Possible Causes

1

Utility power outage

The local electrical grid experienced a brief or extended power interruption.

DIY Possible
2

Tripped circuit breaker or GFCI

The breaker or GFCI outlet protecting the wine cooler circuit has tripped.

DIY Possible
3

Loose electrical connection

The power plug is not fully seated or the outlet has a loose internal connection causing intermittent power drops.

Requires Professional

Safe Checks You Can Do

These checks are safe for homeowners. No disassembly required. Do not remove panels or access internal components.
  1. 1

    Clear the PF code

    Press any button on the control panel to acknowledge and dismiss the PF notification.

    On some models, pressing the alarm or set button will silence the audible alert and clear the display.

  2. 2

    Verify compressor operation

    Listen at the back of the wine cooler for the low hum of the compressor running after the PF code is cleared.

    The compressor may take a few minutes to restart after power is restored due to built-in delay protection.

  3. 3

    Check the electrical supply

    Inspect the circuit breaker, GFCI outlet, and plug to ensure a solid electrical connection.

    If the wine cooler is on a GFCI circuit, consider having an electrician move it to a non-GFCI outlet to prevent nuisance trips.

When to Call a Professional

Contact a qualified technician if:

  • The compressor does not restart after PF is cleared and power is confirmed stable.
  • PF appears multiple times per month without any utility outages.
  • The unit shows PF and the compressor clicks on and off rapidly without running.

Need Professional Help?

Find qualified technicians in your area for proper diagnostics and repair.

Wine Refrigeration Repair Service Schedule Appointment

More Wine Refrigeration Error Codes

View all codes →
OP DF SY LO HI