Electrolux Refrigerator SB Error: Sabbath mode active
Electrolux refrigerator sb error — understanding this error code helps you decide on the right course of action for your Electrolux appliance. What Does the Electrolux SB Code Mean? The SB display on Electrolux French Door and side-by-side refrigerators such as the EI23BC82SS, ERMC2295AS, and EW23BC87SS indicates that Sabbath mode is currently active. This is […]
Yes
DIY Fixable
From $120
Typical Repair Cost
15-30 min
Pro Repair Time
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. Sabbath mode does not affect cooling performance at all. The refrigerator and freezer continue to maintain their set temperatures normally. Only convenience features like lights, alarms, and the dispenser are disabled.
Can I reset the code?
Yes. Sabbath mode is easily deactivated using the appropriate button combination on the control panel, or by performing a power cycle.
When to stop immediately?
Stop if you notice: Stop if the SB indicator reappears on its own after you have deactivated it, indicating a possible interface board issue., Stop if no button combination successfully exits Sabbath mode and a power cycle does not clear it either..
Symptoms You May Notice
SB displayed on control panel
The front display shows SB or the word Sabbath, and most other display elements are dimmed or turned off.
Interior lights do not turn on
Opening the refrigerator or freezer doors does not activate the interior lighting.
No alarm sounds when door is open
The door-open alarm is completely disabled, and no beeping occurs regardless of how long a door remains open.
Dispenser does not work
The water and ice dispenser does not respond to the paddle or buttons while Sabbath mode is active.
Possible Causes
Sabbath mode activated intentionally
Someone in the household deliberately activated Sabbath mode using the button combination on the control panel.
DIY PossibleAccidental button combination press
The specific button combination that activates Sabbath mode was pressed accidentally while cleaning the control panel or by a child.
DIY PossibleUser interface board glitch
A rare software glitch in the user interface board has triggered Sabbath mode without a button press, though this is uncommon.
Requires ProfessionalSafe Checks You Can Do
-
1
Use the deactivation button combo
Press and hold the ice off button and the up arrow button simultaneously for three to five seconds until the SB indicator disappears from the display.
The exact button combination varies by model year. Check your owner manual if this combination does not work.
-
2
Try the alternate button combo
On EI series models, try pressing and holding the freezer down button and the alarm off button together for five seconds.
Some models require you to open a door first before the button combination will register.
-
3
Power cycle the refrigerator
If button combinations do not work, unplug the refrigerator for two full minutes, then plug it back in. Sabbath mode should be deactivated upon restart.
After a power cycle, verify the lights turn on when you open the door to confirm Sabbath mode is off.
When to Call a Professional
Contact a qualified technician if:
- Sabbath mode reactivates on its own repeatedly after being turned off, suggesting a user interface board malfunction from $150.
- No button combination or power cycle can exit Sabbath mode, indicating the control panel may need replacement.
- Other display anomalies accompany the SB indicator, pointing to a broader interface board failure from $200.
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Refrigerator Repair Service Schedule Appointment