Cooktop Diagnostics
Electrolux Cooktop
Electrolux Cooktop
Error Codes
Meanings, severity levels, safe checks you can perform, and when to call a technician.
Enter the code shown on your cooktop display
Is it safe to keep using it?
Depends on code severity. Low/Medium codes often allow continued use, High severity requires immediate stop.
Can error codes be reset?
Some codes clear after power cycle. Persistent codes indicate underlying issues needing repair.
When should I stop using it?
Stop immediately for water leak codes, burning smell, or any High severity error.
Error Code Directory
Click any code for detailed troubleshooting steps
Low
Medium
High
Code
Meaning
Severity
Common Symptom
E0
Internal electronic fault in the control module.
High
The alphanumeric display shows E0 and all heating zones are disabled.
View
E1
Overtemperature protection has been activated.
Medium
The display shows E1 and the affected cooking zone shuts off automatically.
View
E2
Incoming voltage is outside the safe operating range.
High
The cooktop shows E2 and refuses to activate any heating zone.
View
E3
Induction zone cannot detect a compatible pan.
Low
The selected cooking zone displays E3 and does not produce any heat.
View
E4
Temperature sensor is faulty or disconnected.
High
The error appears on a single cooking zone while other zones continue to operate normally.
View
F15
Communication failure between UI and control boards.
High
The cooktop shows F15 and all cooking zones are completely disabled.
View
PF
Power failure detected and recovered.
Low
The cooktop display shows PF once electrical power is restored after an outage.
View