Dryer Diagnostics
Electrolux Dryer
Electrolux Dryer
Error Codes
Meanings, severity levels, safe checks you can perform, and when to call a technician.
Enter the code shown on your dryer display
Is it safe to keep using it?
Depends on code severity. Low/Medium codes often allow continued use, High severity requires immediate stop.
Can error codes be reset?
Some codes clear after power cycle. Persistent codes indicate underlying issues needing repair.
When should I stop using it?
Stop immediately for water leak codes, burning smell, or any High severity error.
Error Code Directory
Click any code for detailed troubleshooting steps
Low
Medium
High
Code
Meaning
Severity
Common Symptom
E61
Insufficient heating
High
The dryer runs and tumbles clothes normally but the air inside the drum remains cool throughout the cycle.
View
E62
Dryer overheating
High
The dryer stops abruptly during a heated cycle and displays E62, refusing to restart until it cools down.
View
E63
Heater circuit fault
High
The control panel displays E63 and the dryer may refuse to start a heated cycle or shut down shortly after starting.
View
E64
Heater open circuit
High
The dryer tumbles normally but produces absolutely no heat throughout the entire cycle, leaving clothes completely wet.
View
E66
Heating relay failure
High
The error code E66 appears on the control panel display and the dryer may refuse to start or stops during a cycle.
View
EF1
Drain or pump fault
Medium
The control panel displays EF1 and the dryer pauses or stops the cycle, waiting for the water issue to be resolved.
View
EF2
Restricted exhaust airflow
Medium
The control panel shows EF2 during or at the end of a drying cycle, alerting you to restricted exhaust airflow.
View
EH0
Board communication error
Medium
Pressing any button on the control panel produces no response, and the dryer will not start any cycle.
View